Blower motor

Drilled lubricating hole at end of blower motor and installed back. No more strange noise :D



syringed some heavy lithium grease

Maintenance

Maintenance tasks done:
- Thermostat (88C; 54 x 24 x 20mm); old one is stuck closed



- Motor oil 5W30; synthetic



- Automatic transmission fluid (Dexron III) changed
- Transfer case fluid (Dexron III) changed



- Power steering fluid changed

Emergency brake

Emergency brake is not functioning and after investigating, found retaining clip was lost. Made one from washer and brake shoes adjusted.

Front shock absorber & BPE

Replaced front shocks. extended length 62cm (24.4"); compressed 34cm (13.4");


this is a BPE made from rear sway bar bracket. Minor cutting for fit in size and grinding for bolt

Front pinion seal

front (D30) pinion seal 62x42x10