Monday, April 18, 2011
Wednesday, April 13, 2011
Tuesday, April 12, 2011
12 volt Wire Gauge vs. Amps
Monday, April 11, 2011
Sunday, April 3, 2011
Injector replacement
After long waiting of nice warmer weather, decided to replace leaky old injectors with 19lb 4 hole ford injectors.
ready... GO! disconnect battery - cable, disconnect vacuum hoses (MAP, fuel pressure regulator etc)

air intake removal

throttle cable disconnected and bracket removed

injector cables disconnected

fuel rail removed, there was lots of junk inside, cleaning with solvent

injector seats cleaned

new injectors installed in rail, a little ATF on rubber seals helps a lot for seating

ready...

injectors and fuel rail seated, don't forget ATF


cables connected and rail bolted

checked for leaks

finished
old injectors

and new injectors
ready... GO! disconnect battery - cable, disconnect vacuum hoses (MAP, fuel pressure regulator etc)
air intake removal
throttle cable disconnected and bracket removed
injector cables disconnected
fuel rail removed, there was lots of junk inside, cleaning with solvent
injector seats cleaned
new injectors installed in rail, a little ATF on rubber seals helps a lot for seating
ready...
injectors and fuel rail seated, don't forget ATF
cables connected and rail bolted
checked for leaks
finished
old injectors
and new injectors
Subscribe to:
Posts (Atom)


