бензин 4.0, механик
дизель, механик
Tuesday, December 20, 2016
Sunday, October 30, 2016
Sunday, September 11, 2016
Leaf spring
Ordered a new leaf spring and they arrived. It has 6 leafs and decent amount of arc.
Shackle is on second hole
passenger side UCA bushing was shot and replaced it with poly one.
With the new pack she sits pretty level at ~4.75" like as before.
Installed them and little playing with my friend
New pack is little stiffer, but hope they will soften soon and not sag a lot. :D
Shackle is on second hole
passenger side UCA bushing was shot and replaced it with poly one.
With the new pack she sits pretty level at ~4.75" like as before.
Installed them and little playing with my friend
New pack is little stiffer, but hope they will soften soon and not sag a lot. :D
Sunday, June 26, 2016
AT mount & transfercae skid
Replaced AT mount.
While removing, transmission cross member driver side rear bolt was broken. Tried to remove, but not successful. Decided to bolt it another place, made a little extension plate from 4mm scrap and welded.
painted
drilled a hole on frame and fished a bolt
crossmember bolted :D
Borrowed a transfer case skid from ZJ and fitted
other angle:
seems good, aligned with frame angle
While removing, transmission cross member driver side rear bolt was broken. Tried to remove, but not successful. Decided to bolt it another place, made a little extension plate from 4mm scrap and welded.
painted
drilled a hole on frame and fished a bolt
Borrowed a transfer case skid from ZJ and fitted
other angle:
seems good, aligned with frame angle
Wednesday, June 22, 2016
Some spare parts
AT mount
AT filter & gasket - taiwan made
Crankshaft Position Sensor, it is Crown, but made in China
Oxygen sensor - it is Crown, but made in China
Champion Copper Plus spark plugs- made in USA
Sunday, June 19, 2016
Saturday, June 18, 2016
bumper reinforcement
Added 2 angle iron to reinforce winch plate and added a plate horizontally on mounting side
Friday, June 17, 2016
Subscribe to:
Posts (Atom)