Showing posts with label Fabrication. Show all posts
Showing posts with label Fabrication. Show all posts

Wednesday, October 23, 2024

Dome light

 modified dome light with 3 small led strips

2 for dome, 1 for reading






Sunday, August 27, 2023

Pillars

once striped all interior, checked pillars and found a cracks there and there.

driver side A pillar - exterior

inside

Passenger side A pillar exterior


 
Inside
 
Driver side B pillar

 
 
Passenger side B pillar

wire brush them and some weld, both inside and outside where needed

and make them flush

 

make some enforcement plates, 1mm steel plate actually cut from old fender

 for A pillar area, will weld outside

for B pillars

 

progress

 

windshield protection and start welding












sanding, primer, paint etc

















Wednesday, November 3, 2021

Wireless phone charger

Ordered Baseus Smart Wireless Charging Suction Cup Mount and removed suction cup. made a adapter to mount charger to the side of center console.

 







 

 



Sunday, June 2, 2019

LED lights and taillight housing

Decided to make taillight with LED lights.

Ordered LED lights from Amazon


AMBOTHER Oval 6'' 22 LED Trailer Lights Red Stop/Turn Signal/Brake/Marker/Tail LED Light, Flush Mount for Truck Trailer Trail Bus 12V Red (Pack of 4)




2.5" Round LED Light Side Marker- Two in One Reflector Light [Polycarbonate Reflector] [13 LEDs] [Rubber Grommet] [IP 67] for Trailers - 4 Red and 4 Amber



 tested LED light operation




Started fabbing, got 1.8mm sheet metal, measured, draw and cut, then fold





made a mistake at corner and have to fill with piece of metal, welded them and applied little layer of putty where they needed.



Sanded down and ready to paint


Spray painted


LEDs mounted and ready to go

woohoo

parking lights

 bought single row 18 LED 18W light for backup light

 Temporarily mounted backup light under rear bumper, will mount them on roof rack after

 It is bright







Tuesday, October 30, 2018

tracbar relocation

Decided to fab a trackbar relocation bracket and mod trackbar itself.

bushing ring and bushings from TLC 80

that's drop

Add some reinforcement in backside



painted :D

fit for final assembly

modified trackbar bolted


added additional support to reduce possibility of bracket movement


finished



steering wheel after upgrade :D


Adjusted :D