AT mount & transfercae skid

Replaced AT mount.

While removing, transmission cross member driver side rear bolt was broken. Tried to remove, but not successful. Decided to bolt it another place, made a little extension plate from 4mm scrap and welded.

painted

drilled a hole on frame and fished a bolt

crossmember bolted :D


Borrowed a transfer case skid from ZJ and fitted

other angle:

 seems good, aligned with frame angle

Exhaust tip

removed exhaust tip

old one rusted and make some strange noise :D

More cleaning

Removed all cables and components of:
- Car alarm system and
- LPG controller/switcher
- High speed warning system

Cruise control servo

Removed cruise control servo,

LPG reducer removed

Removed LPG reducer and coolant hoses connected directly.