My '91 Cherokee XJ

Saturday, March 21, 2020

front speaker replacement

got a 4 Ohm BMW speakers from a friend. Installed them in front door.

before changing speakers, installed some sound deadening sheets

found crack :( around window glass motor area

Speakers are bit bigger than mine, so inner panel needs a cut

Sounds very nice.

Sunday, February 9, 2020

My old stock radiator leaked few points, around filler neck, around radiator input and output. Decided to upgrade radiator, good aluminum ones are crazy expensive, affordable ones are mostly having negative reviews. After short googling, ordered Spectra Premium CU1193 Complete Radiator with 16lbs Stant 10230 Radiator Cap.

They arrived and installation is straight forward. After filling with coolant, it seems volume is lower than stock one, but after few days it almost emptied overflow bottle, needs adding some more coolant.

A/C radiator and hoses were removed, because it lost refrigerant within weeks after filling and now also finding R12 is very difficult nowadays. Result:
1. got a some space in front of radiator and
2. no air blockage, means better cooling :D

Wednesday, January 8, 2020

Distributor replacement

Recently had a knocking/ticking sound from right side of engine when cold. Googled about it and checked distributor. Rotor and cap was okay, but shaft has a play top to down and side to side.

Ordered new one WAI DST4693 and replaced it. It has a brass terminals, overall quality seems very nice.

before removal, noted a rotor position

After distributor installation, checked shaft play, it has a very little top to down play. Anyway resetted PCM and now knocking sound gone

Wednesday, October 30, 2019

throttle body

Thursday, September 19, 2019

fairlead

mounted a roller fairlead for my winch

added a stripe of sheet to strengthen

cleaned, spray painted and roller fairlead mounted there,

license plate is temporarily sandwiched between bumper and roller. Will add some sheet metal or plate behind.

will mount and connect control box, in cab in/out switch soon.

blower issues & solution

Had an issue with blower motor since last winter. 25A fuse, thermal fuse and longest resistor of blower resistor frequently blown. After that I rewired relay and switch directly to blower motor, blowing high speed only.

Rreplaced everything related to blower, blower motor, blower resistor, blower speed switch and mode selector etc, still got fuse blown. in weekend, checked all components by replacing them one by one and later wiggling wires, found that, a green wire at blower resistor short somewhere behind dash panel/glove box. Have to remove dash and check all wires, but it will took whole day, based on youtube videos.

Partially dismantled dash panel and revealed those wires from blower motor resistor to climate control. Both green wire insulation damaged and one was definitely shorted in place of insulation damage. Used a shrink tube and insulation tape, problem solved. No more blown fuse, now we have a 4 speed blower :D