front diff bearing replacement

replaced front diff bearings and oil slingers, oil seal.

broke this one when trying to loosen axle shaft nut :(

 old bearings was pretty loose and front diff seems it had damage before

 pinion and damaged inner oil slinger

 removed old pinion inner bearing

 everything removed

 new bearing with pinion shims

 repaired washer and pinion shims on inner pinion bearing race

 side bearing install - ring side

both side bearings installed

inner oil slinger and pinion bearing seated. I used a torch to heat bearing and it slid freely to the pinion

 all installed back

 prior to install oil seal, yoke tightened well to seat outer pinion bearing

oil seal installed, used little black RTV gasket maker

front driveshaft installed and ready