I just put a sheet of paper on the back of center cap. Center cap had 3 screw holes and 2 pins. Mark their location and make a small hole ~2mm; you got a template. Cut the template and put on wheel, center it and align holes on template with stud hole of wheel. now turn the template till hole on template reaches at mid of 2 stud holes of wheels. Mark through holes and remove template, visual check the locations of holes to be drilled.
Do you think you could email me the template for the wheel, trying the same thing with the Pro-Comps on my TJ.
ReplyDeleteI just put a sheet of paper on the back of center cap. Center cap had 3 screw holes and 2 pins. Mark their location and make a small hole ~2mm; you got a template. Cut the template and put on wheel, center it and align holes on template with stud hole of wheel. now turn the template till hole on template reaches at mid of 2 stud holes of wheels. Mark through holes and remove template, visual check the locations of holes to be drilled.
Delete